For solar and HVAC installers · Ontario
Send the homeowner one link. They approve read-only access at their own utility, and you get 12 months of hourly usage from any of 19 live Ontario utilities, ready for a solar or heat pump proposal.
Each column is a day, each row an hour (midnight at the top).
What it shows: electric heat through the winter nights, evening peaks every day, an air-conditioning block on summer afternoons and EV charging two nights a week. Sample home.
Milton Hydro in testing · View coverage map
Data is shared by homeowners through Green Button Connect My Data, the utilities' own authorization standard.
You finish a site visit and the homeowner is interested. To size the system properly you need their usage, so you ask for a bill. Days later it arrives as a photo of one month, and the proposal ends up built on estimates.
Ontario utilities already offer a better way: Green Button Connect My Data, where homeowners approve access to their own usage. PeakShift builds on it, so one link gets you a full year of hourly data.
Send the homeowner a secure link by email or copy it into a text. They sign in to the utility account they already have and approve read-only access. You get 12 months of hourly usage, with no PDFs or bill photos to collect.
Size from every hour of the last year instead of one bill or an Ontario average. Heat pumps, EV charging and overnight usage show up in the hourly data, so the proposal matches what the homeowner sees on their bills.
Send the link during the site visit. Once the homeowner approves, the usage is in your account and you can build the proposal the same day, while the conversation is still fresh.
A thirty-second overview, then the full walkthrough: the homeowner's link, their approval, a year of hourly usage, and a sized, priced quote in Jobber.
What PeakShift does, in thirty seconds. Watch on YouTube
PeakShift estimates the design heat load from the home's metered usage (electric heat), your F280 heat loss or the floor area, at the local Ontario Building Code design temperature. It screens the electrical service and lists the rebates the home qualifies for.
A usage-based estimate for pre-sizing and quoting. A full CSA F280-12 room-by-room calculation is still required for permitting.
Choose an option
Design temp -18 °C · heat load 34,000 BTU/h
3-ton variable-speed, cold-climate
Backup not needed at -18 °C
Rebate shown: Home Renovation Savings, $1,250/ton for a home with verified electric heat; written pre-approval required. Sample home, figures illustrative.
PeakShift is not a replacement for your design or job software. It supplies the usage data and the proposal, then exports to where you already work.
Data only moves when the homeowner approves it at their own utility, through Green Button Connect My Data.
A request uses one data pull when you send it. The link stays valid for 7 days, so the homeowner can finish later with the same link.
Open the homeowner's usage, choose Export and pick your design tool. The file is formatted for Aurora's interval data import and OpenSolar's hourly usage upload, so there's nothing to retype.
The pilot is free, with 10 data pulls a month and no credit card. Monthly plans start at $199 ($149 a month billed annually), or pay $25 per data pull with no monthly fee.
During the pilot you work with the founder directly. Tell us what your proposals need, or ask for a walkthrough with real data from an Ontario address.